Vac Doctors of Milton Keynes
VAT REG 608 5014 62
We Are Open For Business
Carry out a PAT test to check for any electrical faults and repair, replace or advise customer if faults are expensive to rectify.
Check pipe work and connections for any fluid leakages and repair or replace as necessary.
Check seals and replace as necessary.
Flush solution tank, check filter and clean or replace as necessary.
Flush recovery tank and clean vacuum filter. If machine uses a ball float check for correct operation and adjust if necessary.
QUICK RELEASE CONNECTORS.
Check operation and lubricate or replace as necessary.
Check for correct operation and performance.
Remove any build up of carbon dust within motor housing. Inspect and replace the internal components as necessary.
Check for build up of fluff. Replace pump if not providing enough solution.
Remove any build up of carbon dust on armature and field coils. Check condition of armature and carbon brushes. Replace carbon brushes as necessary. If armature is well worn the motor will need to be replaced.
BRUSH (If fitted)
Remove any hair or carpet fibre from bristles. Check bearings and drive belt for wear and adjust belt tension if necessary.
BRUSH MOTOR (If Fitted)
Remove carbon dust from motor housing and check condition of carbon brushes.
WAND AND HAND TOOLS
Inspect carpet wand and hand tool for sharp edges or damage. Check spray jets for debris, correct alignment and spray pattern.
When all servicing is complete machine is PAT tested again.
Servicing and Repairs to many of the Carpet Extraction machines
Carpet Extraction Machine Repairs
|Carpet Extractor Repairs|